ENESEAL MP/HS

Seal & dustproof concrete without any odor.

ENECLAD CFS is a two-component, 100% solids, clear concrete sealer that is virtually odor-free and has no V.O.C.’s. It has been specifically formulated to provide outstanding sealing and dust-proofing for all types of cement and mineral substrates.

ENECLAD CFS is very easy to apply by roller, brush or rubber squeegee. It penetrates and seals porous concrete providing a hard wearing, non-dusting, easy-to-clean surface.

ENECLAD CFS exhibits excellent abrasion and impact resistance. It holds up to most industrial cleaners, lubricants and common maintenance chemicals. It will seal and bond to concrete, marble, stone, brick, metal, terrazzo, slate, quarry tiles, pavers and wood.

  • No Odor
  • 100% Solids
  • Easy to Clean
  • Excellent Abrasion & Impact Resistance
  • Safe and Simple to Use

Technical Data

Volume capacity per kg.
55 in3 / 900 cc
Mixed density
0.040 lbs per in3 / 1.11 gm per cc
Coverage rate per kg. @ 3 mils / 75 microns
125 ft2 / 11.6 m2
Shelf life
Indefinite
Volume Solids
100%
Mixing ratio Base Activator
By Volume 2 1
By Weight 2.4 1

Working Life & Cure Times

Ambient Temperature Working Life Light Load Full Mechanical
41°F 5°C 2 hrs. 3 days 7 days
59°F 15°C 40 min. 10 hrs. 3 days 
77°F 25°C 20 min. 5 hrs. 2 days
86°F 30°C 15 min. 3 hrs. 1 day

Physical Properties

Typical Values Test Method
Compressive strength 14,000 psi 980 kg/cm2 ASTM D-695
Flexural strength 9,500 psi 665 kg/cm2 ASTM D-790
Hardness - Shore D 80 ASTM D-2240
Tensile Shear Adhesion      
Steel 3,000 psi 210 kg/cm2 ASTM D-1002
Adhesion - to prepared cementitious surfaces is greater than the cohesive strength of the substrate.

Chemical Resistance

Acetic acid (0-5%) G Methyl alcohol G
Acetone G Methyl ethyl ketone G
Ammonia solution (0-10%) EX Nitric acid (0-10%) G
Aviation fuel EX Palmitic acid EX
Butyl alcohol G Phosphoric acid (0-5%) EX
Calcium chloride EX Phosphoric acid (5-10%) G
Crude oil EX Potassium chloride EX
Diesel fuel EX Propyl alcohol G
Ethyl alcohol G Sodium chloride EX
Gasoline EX Sodium hydroxide EX
Heptane EX Sulfuric acid (0-50%) G
Hydrochloric acid (0-10%) EX Tannic acid EX
Hydrochloric acid (10-20%) G Toluene G
Kerosene EX Transformer oil EX
Lactic Acid G Xylene EX

EX - Suitable for most applications including immersion
G - Suitable for intermittent contact, splashes, etc.

Extended Information

Ask an ENECON Tech

Fill out my online form.

Sign up for ENECON's latest Repair - Don't Replace solution

Fill out my online form.