METALCLAD CeramAlloy CL+

Nuclear D.B.A. Tested ASTM 3911-89

Outstanding erosion/corrosion resistance!
Repairs Damaged Equipment — Protects New Components.

The Most Advanced Polymer Composite Coating System Available!

NUCLEAR D.B.A. Tested ASTM 3911-89

METALCLAD CeramAlloy CL+ is a 100% solids, two component, liquid high-performance polymer composite used for repairing, resurfacing and coating components to provide outstanding fluid flow erosion and corrosion resistance.

When mixed, METALCLAD CeramAlloy CL+ is a viscous liquid. CL+ then cures to a hard, ceramic-like material with an extremely smooth surface finish.

High Performance Polymer Composite for resurfacing and protecting all types of fluid flow components from aggressive erosion and corrosion damage.

  • Cavitation Resistant
  • Apply by Brush, Roller or Flexible Applicator
  • Requires No Heat
  • Unlimited Shelf Life
  • 100% Solids
  • Safe & Simple To Use
ABS Type Approved Product
Korean Register Approved Product

Technical Data

Volume capacity per kg.
25 in3 / 410 cc
Mixed density
0.088 lbs per in3 / 2.44 gm per cc
Coverage rate per kg. @ 12 - 15 mils
10 - 11 ft2 / 1 m2
Shelf life
Indefinite
Volume Solids
100%
Mixing ratio Base Activator
By Volume 2.6 1
By Weight 7.5 1

Colors

Blue

Gray

Note: Other colors are available on a “special order” basis. However, there are minimum / multiple quantity requirements for such orders and there may be an increase in cost. Additionally, due to formulation restrictions, not all colors are possible for all materials. Speak to your local ENECON Sales Representative for more information.

Due to monitor / printer differences, actual colors may vary slightly from the representations appearing in this chart.

Working Life and Cure Times

Ambient Temperature Working Life Machining Light Load Full Mechanical Chemical Immersion
41°F 5°C 4 hrs. 1 day 4 days 8 days
59°F 15°C 2 hrs 12 hrs. 2 days 4 days
77°F 25°C 1 hr 6 hrs. 1 day 3 days
86°F 30°C 40 min. 4 hrs. 20 hrs. 2 days

Physical Properties

Typical Values Test Method
Compressive strength 16,000 psi 1120 kg/cm2 ASTM D-695
Flexural strength 15,500 psi 1085 kg/cm2 ASTM D-790
Hardness - Shore D 82 ASTM D-2240
Tensile Shear Adhesion    
Steel 2400 psi 168 kg/cm2 ASTM D-1002
Aluminum 2500 psi 175 kg/cm2 ASTM D-1002
Copper 1950 psi 137 kg/cm2 ASTM D-1002
Stainless Steel 2700 psi 189 kg/cm2 ASTM D-1002
Surface resistivity 1 x 1015 ohms ASTM D-257
Volume resistivity 1 x 1015 ohm/cm ASTM D-257
Dielectric constant 7.5 ASTM D-150
Dielectric strength 652 volts/mil ASTM D-115
Breakdown Voltage 6.1 Kv ASTM D-115

Chemical Resistance

Acetic acid (0-10%) EX Methyl alcohol G
Acetic acid (10-20%) G Methyl ethyl ketone G
Acetone G Nitric acid (0-10%) EX
Aviation fuel EX Nitric acid (10-20%) G
Butyl alcohol EX Phosphoric acid (0-5%) EX
Calcium chloride EX Phosphoric acid (5-10%) G
Crude oil EX Potassium chloride EX
Diesel fuel EX Propyl alcohol EX
Ethyl alcohol G Sodium chloride EX
Gasoline EX Sodium hydroxide EX
Heptane EX Sulfuric acid (0-10%) EX
Hydrochloric acid (0-10%) EX Sulfuric acid (10-20%) G
Hydrochloric acid (10-20%) G Toluene G
Kerosene EX Xylene EX

EX - Suitable for most applications including immersion
G - Suitable for intermittent contact, splashes, etc.

Extended Information

Ask an ENECON Tech

Sign up for ENECON's latest Repair - Don't Replace solution

Fill out my online form.